4 Receiver DSS Satellite 3 x 4 Mini Multiswitch DSS Direct TV TIVO 40-2150 MHZ

4 Receiver DSS Satellite 3 x 4 Mini  Multiswitch DSS Direct TV TIVO 40-2150 MHZ WHAT IS A MULTI-SWITCH? If you want to use more than two receivers on a DSS (DirectTV),TIVO or DISH Network system, you must use a dish with a dual lnb and a multi-switch. This switch enables you to connect 1 to 4 receivers to one dual lnb dish. This switch should be mounted inside and has two grounding lugs to replace your grounding block. There is also a terrestrial input that allows you to connect an off-air antenna or analog cable signal for local channels (to separate the signals you will need a diplexer at each receiver you wish to use the off-air or cable signal). NOTE:Will Not Work With DISH 500 SYSTEMS!!   Multi-Receiver Satellite Multiswitches Designed for Residential and Commercial Applications Compact Slim Design will fit in the palm of your hand Great for tight spaces Multiswitch allows independent operation of multiple satellite receivers using a single dish Combines 2 satellite LNB and 1 off-air TV antenna inputs to any satellite receiver Routes any input to any output using 13-14V vertical or 17-18V horizontal polarities SMD Multiple-Layered Printed Circuit Board Design High-Performance Pin-Diode Signal Switching Precision Machined F-Connector Threads Impedance 75-Ohm – 60mA DC Current Consumption Current Pass 500mA max. Terrestrial Ports Frequency 5-862MHz Satellite Port Frequency 950-2200MHz Supplied with Protective F-Port Plastic Caps 3×4 Compact Satellite Mini-Multiswitch Isolation 20dB – Return Loss 8dB Insertion Loss 7dB Sat, 12dB Terr 3 9/16 (W) x 7/8(H) x 2 5/8(D)

powered by Yahoo shopping